Stoptech Aero-Rotors BMW F30 335i 435i F32 Front Brake Discs 370x30mm - Drilled - Zinc Coating

Stoptech Aero-Rotors BMW F30 335i 435i F32 Front Brake Discs 370x30mm - Drilled - Zinc Coating

StopTech AeroRotors and AeroRotor Kits

StopTech® AeroRotor® Replacement Kits (ARK) are designed to replace your vehicle's original factory rotors, while retaining the factory brake calipers. Although the ARK is the same diameter and thickness as the factory rotors, it offers improved cooling, braking, and handling.

The directional, floating AeroRotors allow independent expansion of the rotor and hat without "coning," thanks to elongated drive pin holes. ARK components include AeroRotor friction rings with patented internal vane design, pre-assembled to billet aluminium AeroHats with directional stand-offs that optimize cooling airflow.

The patented AeroRotor vane design pushes up to 80% more air than factory rotors for better cooling and reduced fade on the track.


The aircraft-grade aluminum hats and 2-piece AeroRotors are up to 8 pounds lighter than stock rotors, allowing faster acceleration and deceleration, and improved handling.

StopTech AeroRotors are available slotted or cross-drilled. These slots or holes allow better dissipation of heat, friction material and debris, assuring that fresh pad material is in contact with the rotor every time the brakes are applied. An optional anti-corrosion, zinc finish is available for customers in cold climates, where salt and chemicals are used to melt snow and ice. The zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of the rotors.

StopTech AeroRotors are 100% made in the USA. 


StopTech AeroRotor Rings 


The patented 2-piece AeroRotor assembly uses uniquely designed and patented AeroVanes® inside the disc to optimize airflow through the rotor. This improved directional design minimizes turbulence and flows up to 61 percent more air than any other rotor tested. The result is up to 80 percent better airflow over original equipment rotors and 10-30 percent better airflow than other directional vane racing rotors currently available. Better airflow equals better cooling, and better cooling means less fade and better overall brake system performance.

StopTech AeroRotors also feature a proprietary alloy chemistry. By adding molybdenum to the gray iron, carefully targeting a narrow range of hardness and tensile strength values, and controlling the cooling rate of the rotor after casting, StopTech produces a friction ring with added crack resistance as well as improved functionality.

Super strong Inconel® drive pin washers - as used in aircraft engines and other racing applications - are practically impervious to oxidation or corrosion even at extreme temperatures.

Street rotors use a curved drive pin washer to add tension to the hat assembly, reducing rattle. Race applications use a flat washer that allows full freedom of movement between hat and friction ring.

StopTech AeroHats feature directional stand offs to further improve airflow and cool the rotor.


Elongated drive pin slots allow separate expansion of rotor and hat to resist coning.

Tapered slots allow evacuation of debris that might otherwise accumulate with straight-cut slots.

Drive pins used to affix the hat to the rotor have a slightly out-of-round hole and are self-locking. They withstand high temperatures much better than typical lock washers and allow drive pins to move freely, yet securely, as hat and rotor expand at different rates.

Drive Pins


In certain applications where packaging is an issue - such as on the Chevrolet Corvette - StopTech uses slant-head drive pins to provide improved clearance as pads wear.

Zinc Plating


Zinc Plating, available on StopTech AeroRotors, prevents corrosion. This is particularly useful in winter climates where road salt and other environmental factors may increase the likelihood of oxidation.


This product is compatible with the following vehicles

Vehicle Make Vehicle Model Vehicle Variant From To Engine Notes
BMW 3 Series 335 F30 2011 N55B30A 3.0L 335i - RWD Petrol
BMW 3 Series 335 F30 2011 N55B30M0 3.0L 335i - RWD Petrol
BMW 3 Series 328 F30 2011 N20B20A 2.0L 328i - RWD Petrol
BMW 3 Series 328 F30 2011 N26B20A 2.0L 328i - RWD Petrol
BMW 3 Series 328 F31 2012 N20B20A 2.0L 328i Touring - RWD Petrol
BMW 4 Series 435 F32 2013 N55B30M0 3.0L - RWD Petrol
BMW 4 Series 435 F33 2013 N55B30M0 3.0L - RWD Petrol
BMW 4 Series 435 F36 2014 N55B30M0 3.0L GC - RWD Petrol

StopTech is the high performance and racing brand from Centric Parts - a leading innovator of world class brake components and systems for production-based race cars and high performance vehicles on the street and track. StopTech was the first to offer balanced brake upgrades for production cars and remains the worldwide leader with over 700 platform offerings that dramatically improve overall braking performance.

StopTech was founded in 1999 with the singular mission of becoming the leading aftermarket manufacturer and supplier of high performance brake components and systems. The company founders sought to challenge the status quo in known brake technology, and set new paradigms for brake system upgrades. United by their passion for racing and high performance vehicles, the company quickly earned a reputation for quality and performance both on and off the track.

StopTech’s industry-leading technologies and materials - from rock solid calipers to ingeniously efficient heat handling rotors - have earned the company four patents and numerous industry honors over the years. In 2013, StopTech earned full ISO/TS 16949:2009 Quality Management System certification for the design and manufacture of automotive brake systems and components, allowing the company to supply OEM vehicle assembly plants directly in a Tier 1 relationship.

StopTech has been awarded the highly coveted TÜV approval on several big brake kits. StopTech kits successfully passed TÜV’s demanding series of tests that range from performance and durability, to proper fitment and ease of installation. Although TÜV certification is not required in all countries, TÜV approval demonstrates that StopTech’s Balanced Brake Upgrades meet the rigorous standards set by this respected German agency. StopTech Big Brake Kits have been awarded a Teilgutachten. The complete kit is certified to run on a particular application, so customers do not need to pay for further testing with the TÜV agency.

Scrivi una recensione

Accedere o registrarsi per recensire
  • Product Code: 81.B39.9941
  • Disponibilità: Disponibile
  • RRP: €1.963,59 (incl. IVA)
  • costo escluso IVA 22%: €1.609,50